Rack and pinion type standard rotary actuators.

2-steps type and 3-steps type of vane type rotary actuator.

Compact, lightweight, high-efficiency vane-type rotary actuator.

The B671 provides force in a reciprocating, rotational motion & is ideal for applications requiring constant torque. The Hydro-Check option provides controlled feed rates & rotational control with pneumatic power through adjustable hydraulic resistance. Add to Compare

The HP series actuator combines an alloy steel gear set with a high strength aluminum housing and precision, micro-finish, seamless, alloy steel tubing cylinders into an actuator suitable for numerous applications where higher torques are required.

PRN(A) series rotary actuators, available in 9 sizes for torque up to 2549 lb-in @ 100 psi, incorporate a rounded vane design to virtually eliminate seal bypass. A selection of rotation angles and oscillating reference points is available for each model.

The PTR series actuator is ideal for most pneumatic applications. The PTR combines alloy steel gears set with a high strength aluminum housing and Parker 3L or 2A series cylinder components into an actuator suitable for years of trouble free service.

PV series rotary actuators, available in 8 sizes for a range of torque up to 1800 lb-in @ 100 psi, are configured as single or double vane. Internal bumpers reduce rotation to 90° or 180°, stroke adjusters adapt the rotation angle to the application.

AIR MOTORS - CHINA

WR series rotary actuator features enable use as a pick-and-place component or precision rotary actuator. Stops provide adjustable rotation from 30° to 205° and feature hydraulic shock absorbers or polyurethane bumpers. Max torque of 65 lb-in @ 100 psi

The XR series is a small rack & pinion designed actuator that combines carburized and tempered steel gear sets with a precision aluminum extrusion housing. These actuators are suitable in applications where space is a premium and low torques are needed.

The P1V-A reversible air motor is available in three different sizes and power ratings of 1600, 2600 or 3600 Watts. Motors can be supplied with gearboxes in planetary, helical or worm drives for correct speed and torque selection.

The P1V-P radial piston air motor is available with three basic motors and power ratings of 73.5, 125 and 228 Watts power. Suitable for low speed, high torque applications that are subject to stringent noise level requirements.

The P1V-S ATEX certified stainless steel air motor is available in seven different sizes and power ratings of 20 to 1200 Watts, and speeds from 5 to 24 000 rpm. With gearboxes in planetary, helical or worm drives.

PV rotary vane actuators are available in four sizes and torque range 0.69 to 30.96Nm at 6 bar. With two versions, a 280° single vane and a 100° double vane that produces twice the torque output from identical envelope dimensions.